An international grip sport contest consisting of four distinct events:
- One-Hand Flask Pinch (Barrel Strength Systems)
- 2.5” Crusher (FBBC)
- Shallow DubHub (Barrel Strength Systems)
- Little Big Horn (IronMind)
The Training Hall by Odd E. Haugen
996 Lawrence Drive, Newbury Park, California
Contest Date: October 26th, 2019
Individual venue promoters may elect to host the contest up to two weeks prior to the main contest date, but no later.
- Men: 59kg / 66kg / 74kg / 83kg / 93kg / 105kg / 120kg / 120+kg
- Men’s Masters 50+ Years: Open
- Women: 72kg / 72+kg
Optional Youth Divisions:
- Boys 10 and under
- Boys 11-13
- Boys 14-15
- Boys 16-17
- Girls 10 and under
- Girls 11-13
- Girls 14-15
- Girls 16-17
Divisions not officially offered in the contest will still be tracked for GSI records purposes (www.gripsport.org).
Custom King Kong gorilla sculptures for the following:
- All class champions
- The overall top lifter in each event
- The Exceptional Lifter (best pound-for-pound performance – using a calculation developed by Andrew Pantke)
- The overall champion (“The King Kong of Grip”)
Custom gorilla medals for 2nd and 3rd place finishers in each class
Scoring: Reverse strongman scoring will be used.
Scoring: Reverse strongman scoring will be used (as done in previous years). Andrew Pantke will tabulate the scoring once all completed scoresheets have been submitted by promoters.
Example of reverse strongman scoring:
If there are 10 athletes, then it would be 1 point for 1st and 10 points for 10th.
All the points are added up at the end. The person with the lowest score is the winner. If the points are equal at the end of the contest, then the placings are found by using the count-back method. This is giving the position to the person with the most amounts of wins. If it is still a tie, then you look at the most amount of 2nd places, and then 3rd, 4th, and so forth till there is a winner. If two athletes are level in say 4th place, then they would receive 4.5pts each (4 plus 5 points are added together and halved). If, after using the count-back method there is still a tie, the person with the lower bodyweight wins.
All competitors must weigh in on a point calibrated or certified calibrated scale no earlier than two hours before the start of the competition.
Either competition weight plates or weight plates that have been weighed on a calibrated scale are to be used. All devices must have been weighed on a calibrated scale as well.
All weights recorded in the scoresheet are to include the weight of the device (including loading pin and crossguard).
The crossbar is set at the height determined by the promoter that allows for the correct height for each event. Lift heights will vary by event.
All venues must run the events in the same order:
- 1st – One-Hand Flask Pinch
- 2nd –2.5” Crusher
- 3rd – Shallow DubHub
- 4th – Little Big Horn
The competitor can switch hands at any time, as desired.
Each competitor is allowed four (4) trips to the platform for official attempts. On each trip, the competitor has one (1) minute during which he/she can make as many attempts as desired. The one-minute time limit also includes equipment prep time (i.e. adding or removing chalk to one’s liking). Chalk can be removed using a dry cloth, paper towels, or equivalent, provided by the venue promoter.
The amount of weight attempted must rise or stay the same for each subsequent trip to the platform.
Warm-ups can be made on the contest apparatus prior to official attempts, but must be declared as such to the referee. However, once a competitor has begun his official attempts, he may no longer do warm-up lifts on the contest apparatus. Promoters may refuse warmups on the contest apparatus assuming a suitable warm up station has been provided.
Individual athletes will have a minimum of two (2) minutes between their trips to the platform, with the maximum at the discretion of the local promoter.
Clothing: Clothing will consist of trousers, shorts or a skirt for a woman for the lower half. For a top a t-shirt, sweatshirts or long-sleeved shirts may be worn after showing that no illegal bracing
is worn on the wrists or elbows. One piece lifting suits are allowed. Gloves are not allowed to be worn when lifting. No inappropriate writings or pictures are allowed.
Belts: Lifting belts are allowed and may be of rubber, nylon, or leather.
Wrist Wraps: Wrist wraps/bands of any kind are not allowed.
Elbow Sleeves: Non-adjustable elbow sleeves are allowed.
Knee Sleeves: Knee sleeves and/or braces are allowed.
Wraps/Bandages: Contingent upon prior approval by the Referee medical tape may be applied to bodily injuries in a fashion that would not grant the lifter an undue advantage.
Only chalk is allowed on the lifter’s
hands. No foreign substances may be applied to the equipment. Liquid chalk
is not permitted. This takes into account all substances other than chalk,
or a sterile agent which may be used periodically in the cleaning of the
equipment, or platform.
Legal Lift Requirements: The athlete must lift the apparatus in an Overhand Pinch Grip and touch the crossguard to the crossbar, which is set for a 7.5” lift.
The lifting hand must be centered on the device. If there is any question as to whether the hand is centered, it is recommended that the judge or referee draw a line down the center of the device and the lifter’s hand must cover the point where the line intersects the top of the Flask.
The lifter does not have to be erect upon completion of the attempt.
Because this is a quick lift based on friction, there is no referee’s down signal. The referee, however, must be ready to judge that the device makes proper contact with the crossbar during each attempt.
The lifter must lower the weight under control. Pinch gripping the device using an unorthodox underhand grip will not be allowed. Touching the straight edges of the device at any point during the lift will invalidate the attempt. Use of any grip aids besides magnesium carbonate chalk is not permitted. Any alteration of the gripping surface of the device is not permitted.
The off-hand may not be placed in contact with device during any part of the attempt. During the lift it can be posted on the hip or leg or left out to the side.
For consistency across all venues, the Flask is to be inserted a minimum of 3.5 inches into the flask. This is to minimize the amount of tilt and leverage that can be gained on the flask. Two examples will be given here. In the case of an FBBC loading pin the bottom hole on the flask will be pinned to the 2nd hole from the top. In the case of a hook top loading pin such as a IronMind pin the top most hole in the flask will be used.
An authentic FBBC Crusher will be used for the event. The crusher will be cleaned and oiled per the manufacturer’s specifications the week prior to the event. The lift height for the event will be a 6” lift.
Only the handle is to be grasped with the fingers on one side, and the thumb opposing on the other side. A thumbless grip is not permitted. No hook grip (i.e. index finger wrapping thumb tip) is permitted even if the athlete has the hand span to do so.
The lifter grabs the Crusher in the center of the handle. In contests, promoters may mark the center of handle with a permanent marker. The handle is to be lifted level with a minimal amount of tilt see following picture for maximum allowed tilting. The athlete’s hand must not come into contact with the metal from of the crusher nor shall the crusher be allowed to be braced on any part of the athlete. A simple check is that no part of the painted portion on the crusher can come into with any part of the lifter.
The lifter will lift the Crusher until the crossguard touches the crossbar. There is no referee’s signal. You do not have to be erect upon completion. You must lower the weight under control (hand grasping it all the way down). If the lifter misses contact with the crossbar, the lifter will still need to have the top of the crossguard cross the plane of the crossbar. Referee’s discretion will be used to judge whether the correct height was attained.
The off-hand may not be placed in
contact with device during any part of the attempt. During the lift it can be
posted on the hip or leg or left out to the side.
The apparatus must be
fastened to the base using the nut and must not be loose and set to the shallow
configuration. The Hub base
must be fixed to a loading pin using the quick
This is a one-handed lift. The lifter’s hand may not reach around or below the base plate or make contact with the inside surface of the hub.
The hub must be lifted approximately level and neither the hub nor the lifting hand may make any contact with the body during the lift.
The athlete must lift the apparatus and touch the crossguard to the crossbar, which is set for a 7.5” lift. The lifter does not have to be erect upon completion of the attempt.
There is no referee’s signal. You must lower the weight under control (hand grasping it all the way down). If the lifter misses contact with the crossbar, the lifter will still need to have the top of the crossguard cross the plane of the crossbar. Referee’s discretion will be used to judge whether the correct height was attained.
The off-hand may not be placed in contact with device during any part of the attempt. During the lift it can be posted on the hip or leg or left out to the side.
There are NO rules specifying the
number of fingers that can or must touch the hub. Any and all gripping
techniques that don’t violate the previous rules are allowed including the V-bar
or door knob style pull.
NOTICE: The following rules differ from the IronMind Rules
The current version of the Little Big Horn should be used.
The lifter grips the Little Big Horn with one hand (no part of the hand can grasp below the rim). The lifter will lift the Little Big Horn until the crossguard comes in contact with the crossbar for a 6” lifting height. If the lifter misses contact with the crossbar, the lifter will still need to have the top of the crossguard cross the plane of the crossbar, referee’s discretion will be used to judge whether the correct height was attained.
There is no referee’s signal. You do not have to be erect upon completion. You must lower the weight under control (hand grasping it all the way down).
The following sections will discuss the support equipment for the event. Moving forward the loading pins and crossguard will not have a specific requirement but a set of guidelines that must be followed. The uprights and crossbar/crossguard allow for a great deal of freedom for the promoters. Promoters may choose to use an adjustable crossguard or an adjustable crossbar. Either method of judging height can be used for King Kong as long as the specific event’s lifting height can be accurately gauged.
NOTE: The simplest method may be to place the crossguard at the bottom of the loading pin for all four events, and then to simply adjust the height of the crossbar for each event. However, this may not be the safest method: the crossguard can tend to swing during the lift for certain events (e.g. the Little Big Horn), and when the weight is put down the crossguard could come down on the athlete’s foot.
- ● Pin height should be between 11” and 16” inches tall.
- ● Loading pins can be no smaller in diameter than 1.9”
- ● Promoters are highly encouraged to have a backup loading pin in the case the main pin breaks during the event. It has happened in the past.
The following pins are examples that
meet the above criteria. As long as the criteria is met, any loading pin is
- ○ FBBC Contest and Omni Pins
- ○ Barrel Strength Loading Pins
- ○ IronMind Loading Pin
- ● Must be a rigid material that protrudes perpendicular from the loading pin. The Cross-guard must extend past the plates that will be used at the event to be able to hit the crossbar.
- ● Cross-guards can be adjustable in position.
- The following crossguards is an
example that meets the above criteria. As long as the criteria is met, any crossguard
- FBBC Cross-guard
- FBBC ultra light Cross-guard
Crossbars and uprights:
- ● Provide a non-rigid height gauge for the crossguards to come in contact with.
- Uprights can be made of any material that allows the Cross-Bar to sit at the desired height.
- Homemade versions are allowed for this.
- ● The following cross-bar and uprights
set-up is an example that meets the above criteria. As long as the criteria is
met, any cross-bar and uprights set-up is fine.
- Barrel Strength competition crossbar.
- ● In the case where an athlete cannot reach the height requirements comfortably, blocks or weight plates should be available for the athlete to stand on.
Example Block to stand on.
With King Kong being an
international multi-venue contest, not all venues will be running the contest
at the same time. If athletes post scores or video prior to all individual
contests being completed, it is possible for some athletes to use this
information to influence their weight attempt selections and have an advantage.
For this reason, we discourage the posting of attempts, scores, or video until
all venues have wrapped up – ideally until official results are posted.
However, no penalties will be incurred if this guideline is ignored. We are
relying on venue promoters to explain to the athletes why they would want to
hold off posting on social media, as it can only hurt their scores.
This section is to clarify the expectations of the promoters and athletes taking part in the International King Kong Grip Challenge.
- The promoter will be familiar with all the general rules and individual event rules as laid out in this document.
- The promoter will enforce the event rules.
- The promoter will only use equipment from the designated supplier (i.e. an authentic Barrel Strength Flask, an authentic FBBC 2.5” Crusher, an authentic Barrel Strength DubHub, and an authentic IronMind Little Big Horn).
- The promoters will ensure that all equipment has been maintained and serviced to the manufacturer’s specification. Damaged equipment must not be used in any circumstance.
Due to the number of variables it would both be impossible and impractical to list out each and every situation that could gain an athlete an advantage. The International King Kong Grip Challenge is unique to other contests in that athletes are competing with athletes in multiple locations around the world. The goal for each promoter should be to maintain uniformity to the best of their ability. The nature of grip is that a 100% uniformity would be impossible without everyone in the world lifting on the same equipment on the same day. This said, any action taken by a promoter to gain an advantage for themselves of their athletes can result in penalties being levied against the location even if no direct rule was broken. Not only will the letter of the law be enforced but the spirit as well.
Warnings and Penalties:
Let us first and foremost state that we have no desire to ever need to implement the following penalties but as the contest grows the chance that something will come up increases. This will set down a guideline for what will happen in the case of unethical conduct to outright cheating. When something off is noticed, the impact to the overall integrity of the contest is what will primarily be considered in determining the penalty level.
Warning: In a case where the offence does not impact the integrity of the contest and would not have within reasonable certainty affected the outcome the venue or person the venue will receive a warning. The immediate effect will be a discussion on how to move forward and eliminate this problem from future events. In the case that a venue or person receives a related or repeated minor penalty the following year, the offence will be upgraded to a moderate penalty.
- Several missed calls (e.g. repeatedly not noticing when an athlete is not following the rules (for example intentional body contact)).
- Allowing an athlete to compete wearing a wrist band.
Moderate Penalty: In the case that an offence does have a measurable impact to the contest that would give the athletes a measurable advantage, yet the offence is not serious enough to warrant a major penalty. In this case the contest promoter along with the top 2 to 5 athletes at the location will take a 25% reduction in lifting scores. This will be evaluated on an event-by-event basis. If in doubt it will be applied to all 4 events. This will ensure that promoters that are not competing will not have the incentive to cheat to gain an advantage for their athletes. As well as putting ownership on the athletes themselves to keep an eye out for any issues that could appear. The reason this will not apply to all the athletes is for two reasons. First the top athletes are normally the most experienced and will be able to catch any cheating and puts their scores on the line to discourage cheating. Second punishing most of the athletes at the venue that would not affect the top scores could discourage newer athletes.
- Not using authentic equipment (e.g. a horn other than an IronMind Little Big Horn)
- Using equipment that is damaged or not working properly
Major Penalty: In the case that an offence has a major impact across the contest site that would give the athletes a major advantage the entire location will be forced to take a zero. This would be considered blatant cheating.
- Falsifying scores
- Using fake weights
Note that the venue promoter bares most of the responsibility for ensuring all rules are followed. This said, individual athletes can be removed from the competition at the venue promoter’s discretion. For example, if an athlete refuses to follow instructions after being told several times, he/she can be ejected from the competition.